@article {859,
	title = {A general framework for the assessment of solar fuel technologies},
	journal = {Energy Environ. Sci.},
	volume = {8},
	year = {2015},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {126-157},
	issn = {1754-5692, 1754-5706},
	doi = {10.1039/C4EE01958J},
	url = {http://xlink.rsc.org/?DOI=C4EE01958J},
	author = {Jeffrey A. Herron and Jiyong Kim and Aniruddha A. Upadhye and George W. Huber and Christos T. Maravelias}
}
@article {1025,
	title = {Electrochemical behaviour of titanium in H2SO4{\textendash}MnSO4 electrolytes},
	journal = {Electrochimica Acta},
	volume = {51},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {3338-3345},
	abstract = {The corrosion of titanium in H2SO4 electrolytes (0.001{\textendash}1.0M) at temperatures from ambient to 98{\textdegree}C has been investigated using steady-state polarization measurements. Four distinct regions of behaviour were identified, namely active corrosion, the active{\textendash}passive transition, passive region and the dielectric breakdown region. The active corrosion and active{\textendash}passive transition were characterized by anodic peak current (im) and voltage (Em), which in turn were found to vary with the experimental conditions, i.e., d(log⁡(im))/dpH=-0.8{\textpm}0.1 and dEm/dpH which was -71mV at 98{\textdegree}C, -58mV at 80{\textdegree}C and -28mV at 60{\textdegree}C. The activation energy for titanium corrosion, determined from temperature studies, was found to be 67.7kJmol-1 in 0.1M H2SO4 and 56.7kJmol-1 in 1.0M H2SO4. The dielectric breakdown voltage (Ed) of the passive TiO2 film was found to vary depending on how much TiO2 was present. The inclusion of Mn2+ into the H2SO4 electrolyte, as is done during the commercial electrodeposition of manganese dioxide, resulted in a decrease in titanium corrosion current, possibly due to Mn2+ adsorption limiting electrolyte access to the substrate.},
	issn = {0013-4686},
	doi = {10.1016/j.electacta.2005.09.031},
	url = {http://www.sciencedirect.com/science/article/pii/S001346860501128X},
	author = {W. B. Utomo and S. W. Donne}
}
@article {1036,
	title = {Hydrogen Production From Water Electrolysis: Current Status and Future Trends},
	journal = {Proceedings of the IEEE},
	volume = {100},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {410-426},
	abstract = {This paper reviews water electrolysis technologies for hydrogen production and also surveys the state of the art of water electrolysis integration with renewable energies. First, attention is paid to the thermodynamic and electrochemical processes to better understand how electrolysis cells work and how they can be combined to build big electrolysis modules. The electrolysis process and the characteristics, advantages, drawbacks, and challenges of the three main existing electrolysis technologies, namely alkaline, polymer electrolyte membrane, and solid oxide electrolyte, are then discussed. Current manufacturers and the main features of commercially available electrolyzers are extensively reviewed. Finally, the possible configurations allowing the integration of water electrolysis units with renewable energy sources in both autonomous and grid-connected systems are presented and some relevant demonstration projects are commented.},
	issn = {0018-9219},
	doi = {10.1109/JPROC.2011.2156750},
	author = {A. Ursua and L. M. Gandia and P. Sanchis}
}
@article {1038,
	title = {Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production},
	journal = {Solid State Ionics},
	volume = {3-4},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {359-363},
	abstract = {Some sintered oxides based on SrCeO3 were found to exhibit proton conduction on exposing them to a hydrogen-containing atmosphere at high temperature. The verification of proton conduction was made by studying the emf of various gas cells using the specimen diaphragm as an electrolyte. These materials could be applied to the electrolyte for steam electrolysis to produce hydrogen gas.},
	issn = {0167-2738},
	doi = {10.1016/0167-2738(81)90113-2},
	url = {http://www.sciencedirect.com/science/article/pii/0167273881901132},
	author = {H. Iwahara and T. Esaka and H. Uchida and N. Maeda}
}
@article {1033,
	title = {Solid oxide proton conducting steam electrolysers},
	journal = {Solid State Ionics},
	volume = {179},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {1120-1124},
	abstract = {Proton conducting ceramics based on acceptor doped perovskites are the subject of investigation as candidate electrolyte materials for Solid Oxide Electrolyser Cells (SOECs) that operate at intermediate temperatures. Initial work has focused on BaCe0.9Y0.1O3-δ (BCY10) and BaZr0.9Y0.1O3-δ (BZY10) as these materials have been proven to have high proton conductivities [K.H. Ryu, M. Haile, Solid State Ionics 125 (1999) 355]. Conductivity data from AC impedance spectroscopy measurements for BCY10 is in agreement with the literature. BZY10 doped with 1~wt.\% ZnO was found to have a significantly lower conductivity between 200 and 600~{\textdegree}C than BCY10. BCY10 has been confirmed as a suitable electrolyte material for a reversible proton conducting solid oxide fuel cell. Large losses are observed at lower temperatures in electrolysis mode and are attributed to the slow progression of reactions at the electrodes.},
	issn = {0167-2738},
	doi = {10.1016/j.ssi.2008.01.067},
	url = {http://www.sciencedirect.com/science/article/pii/S0167273808001082},
	author = {Paul A. Stuart and Toshiyuki Unno and John A. Kilner and Stephen J. Skinner}
}
