@article {1136, title = {Comprehensive Evaluation for Protective Coatings: Optical, Electrical, Photoelectrochemical, and Spectroscopic Characterizations}, journal = {Frontiers in Energy Research}, volume = {9}, year = {2022}, month = {2022}, abstract = {Numerous efficient semiconductors suffer from instability in aqueous electrolytes. Strategies utilizing protective coatings have thus been developed to protect these photoabsorbers against corrosion while synergistically improving charge separation and reaction kinetics. Recently, various photoelectrochemical (PEC) protective coatings have been reported with suitable electronic properties to ensure low charge transport loss and reveal the fundamental photoabsorber efficiency. However, protocols for studying the critical figures of merit for protective coatings have yet to be established. For this reason, we propose four criteria for evaluating the performance of a protective coating for PEC water-splitting: stability, conductivity, optical transparency, and energetic matching. We then propose a flow chart that summarizes the recommended testing protocols for quantifying these four performance metrics. In particular, we lay out the stepwise testing protocols to evaluate the energetics matching at a semiconductor/coating/(catalyst)/liquid interface. Finally, we provide an outlook for the future benchmarking needs for coatings.}, keywords = {coating, energetics, performance evaluation, performance metrics, spectroscopy}, issn = {2296-598X}, doi = {10.3389/fenrg.2021.799776}, url = {https://www.frontiersin.org/article/10.3389/fenrg.2021.799776}, author = {Shen, Xin and Yanagi, Rito and Solanki, Devan and Su, Haoqing and Li, Zhaohan and Xiang, Cheng-Xiang and Hu, Shu} } @article {1149, title = {Spatially resolved performance and degradation in a perfluorinated anion exchange membrane fuel cell}, journal = {Electrochimica Acta}, volume = {406}, year = {2022}, pages = {139812}, abstract = {Anion exchange membrane fuel cells may enable future operation with non-precious metal-based catalysts. These systems have a delicate sensitivity to operating conditions such as humidification levels and the presence of CO2 in the air oxidant stream. We present spatially resolved in-situ performance results that shed light on phenomena that are unique to anion exchange membrane fuel cells. For cell construction, a highly conductive perfluorinated anion exchange polymer was used as the membrane and the material in powder form as the ionomer. Experiments were conducted to investigate the effects of humidification, fuel/oxidant concentration, and carbonation effects on the performance and its distribution in the cell. The results indicated that (i) dry conditions at the cathode have a stronger effect than at the anode on overall cell performance, (ii) performance significantly suffered when humidification was below 90\%, (iii) fuel and oxidant dilution effects lead mass-transport losses and were stronger than flow rate effects, (iv) CO2 in the cathode feed stream creates an equilibration disparity between the inlet and outlet sections and CO2 purging is affected by flooding conditions, and (v) after >500~h of operation, performance deteriorates predominantly at the inlet.}, keywords = {2+1D fuel cell model, Anion Exchange membranes, Cathode dry-out, CO poisoning, Fuel cell durability, Mass transport limitations, Segmented fuel cell}, issn = {0013-4686}, doi = {https://doi.org/10.1016/j.electacta.2021.139812}, url = {https://www.sciencedirect.com/science/article/pii/S0013468621020958}, author = {Ashutosh G. Divekar and Michael R. Gerhardt and Christopher M. Antunes and Luigi Osmieri and Ami C. Yang-Neyerlin and Adam Z. Weber and Bryan S. Pivovar and Guido Bender and Andrew M. Herring} } @article {1159, title = {Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity}, journal = {Journal of Power Sources}, volume = {495}, year = {2021}, pages = {229764}, abstract = {Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr2NiO4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm2, a current density of 1.96 A/cm2 at 700~{\textdegree}C is achieved on Pr1.7Ba0.3NiO4+δ, one of the best performances for PCECs.}, keywords = {Hydrogen generation, Protonic ceramic electrolysis cells, Ruddlesden-popper phase, Triple-conducting electrocatalyst, Water-splitting}, issn = {0378-7753}, doi = {https://doi.org/10.1016/j.jpowsour.2021.229764}, url = {https://www.sciencedirect.com/science/article/pii/S0378775321003050}, author = {Wenyuan Li and Bo Guan and Tao Yang and Zhongqiu Li and Wangying Shi and Hanchen Tian and Liang Ma and Thomas L. Kalapos and Xingbo Liu} } @article {1174, title = {Mg $\less$sub$\greater$x$\less$/sub$\greater$ Zn$\less$sub$\greater$1-x $\less$/sub$\greater$O contact to CuGa$\less$sub$\greater$3$\less$/sub$\greater$Se$\less$sub$\greater$5$\less$/sub$\greater$ absorber for photovoltaic and photoelectrochemical devices}, journal = {Journal of Physics: Energy}, volume = {3}, year = {2021}, month = {jan}, pages = {024001}, abstract = {CuGa3Se5 is a promising candidate material with wide band gap for top cells in tandem photovoltaic and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not suitable for CuGa3Se5 due to the higher position of its conduction band (CB) minimum. Mg x Zn1- x O (MZO) is a transparent oxide with adjustable band gap and CB position as a function of magnesium composition, but its direct application is hindered by CuGa3Se5 surface oxidation. Here, MZO is investigated as a contact (n-type {\textquoteleft}buffer{\textquoteright} or {\textquoteleft}window{\textquoteright}) material to CuGa3Se5 absorbers pretreated in Cd2+ solution, and an onset potential close to 1 V vs reversible hydrogen electrode in 10 mM hexaammineruthenium (III) chloride electrolyte is demonstrated. The Cd2+ surface treatment changes the chemical composition and electronic structure of the CuGa3Se5 surface, as demonstrated by photoelectron spectroscopy measurements. The performance of CuGa3Se5 absorber with Cd2+ treated surface in the solid-state test structure depends on the Zn/Mg ratio in the MZO layer. The measured open circuit voltage of 925 mV is promising for tandem PEC water splitting with CuGa3Se5/MZO top cells.}, keywords = {Photocathode; PEC; Buffer layer; CuGaSe; MgZnO}, doi = {10.1088/2515-7655/abd3b3}, url = {https://doi.org/10.1088/2515-7655/abd3b3}, author = {Imran S Khan and Christopher P Muzzillo and Craig L Perkins and Andrew G Norman and James L Young and Nicolas Gaillard and Andriy Zakutayev} } @article {1120, title = {Outstanding Properties and Performance of CaTi0.5Mn0.5O3{\textendash}δ for Solar-Driven Thermochemical Hydrogen Production}, journal = {Matter}, volume = {4}, year = {2021}, pages = {688-708}, keywords = {inorganic perovskite, oxygen non-stoichiometry, phase transition, solar fuel, thermo-kinetic limit, thermochemical hydrogen production, thermodynamic properties}, doi = {https://doi.org/10.1016/j.matt.2020.11.016}, author = {X. Qian and J. He and E. Mastronardo and B. Baldassarri and W. Yuan and C. Wolverton and S. M. Haile} } @article {1080, title = {Addressing the Stability Gap in Photoelectrochemistry: Molybdenum Disulfide Protective Catalysts for Tandem III{\textendash}V Unassisted Solar Water Splitting}, journal = {ACS Energy Letters}, year = {2020}, month = {07/2020}, pages = {2631-2640}, doi = {10.1021/acsenergylett.0c01132}, url = {https://doi.org/10.1021/acsenergylett.0c01132}, author = {Micha Ben-Naim and Reuben J. Britto and Chase W. Aldridge and Rachel Mow and Myles A. Steiner and Adam C. Nielander and Laurie A. King and Daniel J. Friedman and Todd G. Deutsch and James L. Young and Thomas F. Jaramillo} } @article {1168, title = {Deconvolution of Water-Splitting on the Triple-Conducting Ruddlesden{\textendash}Popper-Phase Anode for Protonic Ceramic Electrolysis Cells}, journal = {ACS Applied Materials \& Interfaces}, volume = {12}, year = {2020}, note = {PMID: 33079527}, pages = {49574-49585}, keywords = {atomic layer, proton conductors, relaxation time distribution, ruddlesden-popper phase, steam electrolysis, triple-conducting}, doi = {10.1021/acsami.0c12987}, url = {https://doi.org/10.1021/acsami.0c12987}, author = {Tian, Hanchen and Li, Wenyuan and Ma, Liang and Yang, Tao and Guan, Bo and Shi, Wangying and Kalapos, Thomas L. and Liu, Xingbo} } @article {1170, title = {Emergent Degradation Phenomena Demonstrated on Resilient, Flexible, and Scalable Integrated Photoelectrochemical Cells}, journal = {Advanced Energy Materials}, volume = {10}, year = {2020}, pages = {2002706}, abstract = {Abstract Photoelectrochemical (PEC) water splitting provides a pathway to generate sustainable clean fuels using the two most abundant resources on Earth: sunlight and water. Currently, most of the successful models of PEC cells are still fabricated on small scales near 1 cm2, which largely limits the mass deployment of solar-fuel production. Here, the scale-up to 8 cm2 of an integrated PEC (IPEC) device is demonstrated and its performance compared to a 1 cm2 IPEC cell, using state-of-the-art iridium and platinum catalysts with III{\textendash}V photoabsorbers. The initial photocurrents at 1 sun are 8 and 7 mA cm-2 with degradation rates of 0.60 and 0.47 mA cm-2 day-1, during unbiased operation for the 1 and 8 cm2 devices, respectively. Evaluating under outdoor and indoor conditions at two U.S. National Laboratories reveals similar results, evidencing the reproducibility of this design{\textquoteright}s performance. Furthermore, the emerging degradation mechanisms during scale-up are investigated and the knowledge gained from this work will provide feedback to the broader community, since PEC device durability is a limiting factor in its potential future deployment.}, keywords = {durability, on-sun testing, PEC cell scale-up, reproducibility, water splitting}, doi = {https://doi.org/10.1002/aenm.202002706}, url = {https://onlinelibrary.wiley.com/doi/abs/10.1002/aenm.202002706}, author = {Kistler, Tobias A. and Zeng, Guosong and Young, James L. and Weng, Lien-Chun and Aldridge, Chase and Wyatt, Keenan and Steiner, Myles A. and Solorzano Jr., Oscar and Houle, Frances A. and Toma, Francesca M. and Weber, Adam Z. and Deutsch, Todd G. and Danilovic, Nemanja} } @article {1087, title = {Highly efficient and durable III{\textendash}V semiconductor-catalyst photocathodes via a transparent protection layer}, journal = {Sustainable Energy Fuels}, volume = {4}, year = {2020}, pages = {1437-1442}, abstract = {

Durable performance and high efficiency in solar-driven water splitting are great challenges not yet co-achieved in photoelectrochemical (PEC) cells. Although photovoltaic cells made from III{\textendash}V semiconductors can achieve high optical{\textendash}electrical conversion efficiency, their functional integration with electrocatalysts and operational lifetime remain great challenges. Herein, an ultra-thin TiN layer was used as a diffusion barrier on a buried junction n+p-GaInP2 photocathode, to enable elevated temperatures for subsequent catalyst growth of Ni5P4 as nano-islands without damaging the GaInP2 junction. The resulting PEC half-cell showed negligible absorption loss, with saturated photocurrent density and H2 evolution equivalent to the benchmark photocathode decorated with PtRu catalysts. High corrosion-resistant Ni5P4/TiN layers showed undiminished photocathode operation over 120 h, exceeding previous benchmarks. Etching to remove electrodeposited copper, an introduced contaminant, restored full performance, demonstrating operational ruggedness. The TiN layer expands the synthesis conditions and protects against corrosion for stable operation of III{\textendash}V PEC devices, while the Ni5P4 catalyst replaces costly and scarce noble metal catalysts.

}, doi = {10.1039/C9SE01264H}, url = {http://dx.doi.org/10.1039/C9SE01264H}, author = {Shinjae Hwang and James L. Young and Rachel Mow and Anders B. Laursen and Mengjun Li and Hongbin Yang and Philip E. Batson and Martha Greenblatt and Myles A. Steiner and Daniel Friedman and Todd G. Deutsch and Eric Garfunkel and G. Charles Dismukes} } @article {1083, title = {Creating stable interfaces between reactive materials: titanium nitride protects photoabsorber{\textendash}catalyst interface in water-splitting photocathodes}, journal = {Journal of Materials Chemistry A}, volume = {7}, year = {2019}, pages = {2400-2411}, abstract = {

Published on January 29th, 2019. The development of a solar-driven water splitting device that replaces costly precious metals, while achieving stable high performance, is a major challenge. Transition metal phosphides are active and low-cost catalysts for the hydrogen evolution reaction (HER), although, none thus far have exhibited stable performance when interfaced with semiconductors. Here, we report on a monolithic junction consisting of cubic-NiP2:TiN:Si, fabricated using both commercial and custom Si photovoltaics. Stable performance is achieved using an ultrathin film of crystalline TiN that effectively hinders atomic diffusion between interfaces during fabrication. Crystalline cubic-NiP2 deposited on TiN/n+p-Si retains 97\% of the bare Si photovoltage, comparable saturation current density to bare Si, and has a turnover frequency of 1.04 H2 per site per s at -100 mV applied potential. In acid, it requires only -150 mV additional overpotential compared to the benchmark, Pt/TiN/n+p-Si, to reach a HER photocurrent density of -10 mA cm-2. This photocathode maintains a stable H2 photocurrent ({\textpm}10\%) for at least 125 hours, the duration of testing. When the same layers are fabricated on a commercial Si solar cell, this photocathode produced double the photocurrent density (36.3 mA cm-2, under simulated 1.5 AM G illumination). Physical characterization gives detailed information on the properties responsible for the observed activity and durability of these interfaces. In general, the thin-film methodology presented here is widely applicable, demonstrates superior activity, and achieves long-term stability.

}, issn = {2050-7496}, doi = {10.1039/C8TA12186A}, url = {https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12186a}, author = {Shinjae Hwang and Spencer H. Porter and Anders B. Laursen and Hongbin Yang and Mengjun Li and Viacheslav Manichev and Karin U. D. Calvinho and Voshadhi Amarasinghe and Martha Greenblatt and Eric Garfunkel and G. Charles Dismukes} } @article {1186, title = {High performance III-V photoelectrodes for solar water splitting via synergistically tailored structure and stoichiometry}, journal = {Nature Communications}, volume = {10}, year = {2019}, pages = {3388}, keywords = {Ammonium sulfide surface passivation, Antireflection, Density graded surface, GaInP2, III-V, PEC, Photocathode}, doi = {10.1038/s41467-019-11351-1}, author = {Lim, Haneol and Young, James L. and Geisz, John F. and Friedman, Daniel J. and Deutsch, Todd G. and Yoon, Jongseung} } @article {1187, title = {Interfacial engineering of gallium indium phosphide photoelectrodes for hydrogen evolution with precious metal and non-precious metal based catalysts}, journal = {Journal of Materials Chemistry A}, volume = {7}, year = {2019}, pages = {16821-16832}, abstract = {Gallium indium phosphide (GaInP2) is a semiconductor with promising optical and electronic properties to serve as the large bandgap, top junction in a dual absorber tandem solar water splitting device. Poor intrinsic catalytic ability and surface corrosion in aqueous electrolyte remain key obstacles. Significant progress has been made developing thin-film protection layers and active catalysts for photoelectrochemical devices, but combining these into a catalytic protection layer that can provide long-term stability without sacrificing performance has proven difficult due, in large part, to challenges in developing active and stable interfaces. In this work, we demonstrate that a nanoscale molybdenum disulfide (MoS2) film functions both as an effective protection layer and excellent hydrogen evolution catalyst for GaInP2 photocathodes, with only a \~{}10\% loss in initial light-limited current density after 100 h, and a photocurrent onset potential better than that of the same state-of-the-art device with a platinum{\textendash}ruthenium catalyst. Using transient photoreflectance spectroscopy, we probed the carrier dynamics of these photocathodes and show that the MoS2 coated device exhibits improved electron transfer at the surface interface compared to the PtRu catalyzed device. These MoS2 protected devices are among the most active and stable single-absorber photocathodes for solar water splitting to date and offer a promising pathway towards generating hydrogen with high efficiency and significant longevity.}, keywords = {durability, GaInP2, III-V, MoS2 hydrogen evolution catalyst, MoS2 protective coating, PEC, Photocathode}, doi = {10.1039/C9TA05247J}, url = {http://dx.doi.org/10.1039/C9TA05247J}, author = {Britto, Reuben J. and Young, James L. and Yang, Ye and Steiner, Myles A. and LaFehr, David T. and Friedman, Daniel J. and Beard, Mathew and Deutsch, Todd G. and Jaramillo, Thomas F.} } @article {1067, title = {Investigation of porous transport layer parameters for proton exchange membrane water electrolysis}, year = {2019}, abstract = {
  1. Presentation
  2. Investigation of porous transport layer parameters for proton exchange membrane water electrolysis
  3. Presenter
    Zhenye Kang
  4. Contributor
    Shaun M. Alia
  5. Contributor
    James L. Young
  6. Contributor
    Guido Bender
  7. LTE
  8. 2019
  9. Hilton Atlanta, Atlanta, GA, USA
  10. 236th ECS Meeting
  11. http://ma.ecsdl.org/content/MA2019-02/37/1747.short
  12. 11/6/2019, 10:47:45 AM
  13. 12/6/2019, 1:28:14 PM
Abstract
Published on October 17th, 2019 Hydrogen production through proton exchange membrane water electrolysis (PEMWE) is regarded as a very promising technology that offers a highly efficient and robust path to store electrical energy in form of hydrogen and further enables the integration of renewable energy into the electrical grid 1-3. The total cell voltage of a single PEM water electrolyzer cell is composed of the open circuit voltage, activation overpotential, diffusion overpotential, and ohmic loss overpotential 4. The total voltage of the cell can be expressed as Eq(1) 5. V=V_OCV+V_act+V_ohm+V_diff (1) Where V_OCV is the Nernst potential which is also called the reversible voltage and can be calculated from the Nernst equation or Gibbs free energy, V_act is the activation overpotential due to the electrochemical reaction and it represents the overpotential to drive the electron transfer and electrochemical reaction kinetics as described by the Butler-Volmer model, V_ohm is the ohmic overpotential caused by the resistances of the electronic/ionic components and interfacial contact resistances, and V_diff is the diffusion overpotential related to mass transport. Porous transport layers (PTLs) are key components in PEMWE. They facilitate mass transport, thermal and electrical conduction, and are required to sustain a good contact with adjacent components 6-8. It is expected that various PTLs with different structures and wettability exhibit nonidentical performance in PEMWE. In this study, a general model is established to investigate the PTL parameters of four inherently different PTLs, including non-treated Toray paper, PTFE treated Toray paper, sintered titanium particles and Ti felt. SEM images highlighting the structures of these PTL materials are shown in Figure 1. The materials, which differed in thickness, porosity, material and composition were evaluated with identical MEAs over a range of operating conditions for model validation. The resulting data indicate that the hydrophobic additives in the Toray paper will decrease the PEMWE performance due to increased mass transport loss and ohmic loss. Ti felt with similar thickness and porosity as non-treated Toray paper showed slightly reduced performance due to its higher ohmic loss. Sintered Ti particle PTLs exhibit much higher ohmic resistance than Ti felt and nontreated Toray paper, which may be attributed to its significantly larger thickness and/or an increased contact resistance. The experimental data was employed to validate the MATLAB/Simulink model which enables the simulation of the contribution of each overpotential. The model was used to successfully describe the effects of PTFE loading on PEMWE performance, as shown in Figure 2. The hydrophobic treatment resulted, as expected, in detrimental performance effects. The diffusion loss of a 20\% PTFE treated Toray paper is significantly higher than that of the nontreated PTLs (Figure 2). The modeling results also indicate that the change of the wettability of the PTLs by hydrophobic additives/agents, impacted not only the diffusion loss significantly, but also affected the ohmic loss and activation loss. This was specifically detrimental to PEMWE cell performance when operating at high current densities. The model that was validated in this study can be used to predict the effects of key PTL parameters and utilized to optimize PEMWE performance.
}, url = {http://ma.ecsdl.org/content/MA2019-02/37/1747.short}, author = {Zhenye Kang and Shaun M. Alia and James L. Young and Guido Bender} } @article {1089, title = {Molybdenum Disulfide Catalytic Coatings via Atomic Layer Deposition for Solar Hydrogen Production from Copper Gallium Diselenide Photocathodes}, journal = {ACS Applied Energy Materials}, volume = {2}, year = {2019}, pages = {1060-1066}, abstract = {

We demonstrate that applying atomic layer deposition-derived molybdenum disulfide (MoS2) catalytic coatings on copper gallium diselenide (CGSe) thin film absorbers can lead to efficient wide band gap photocathodes for photoelectrochemical hydrogen production. We have prepared a device that is free of precious metals, employing a CGSe absorber and a cadmium sulfide (CdS) buffer layer, a titanium dioxide (TiO2) interfacial layer, and a MoS2 catalytic layer. The resulting MoS2/TiO2/CdS/CGSe photocathode exhibits a photocurrent onset of +0.53 V vs RHE and a saturation photocurrent density of -10 mA cm{\textendash}2, with stable operation for \>5 h in acidic electrolyte. Spectroscopic investigations of this device architecture indicate that overlayer degradation occurs inhomogeneously, ultimately exposing the underlying CGSe absorber.

}, doi = {10.1021/acsaem.8b01562}, url = {https://doi.org/10.1021/acsaem.8b01562}, author = {Thomas R. Hellstern and David W. Palm and James Carter and Alex D. DeAngelis and Kimberly Horsley and Lothar Weinhardt and Wanli Yang and Monika Blum and Nicolas Gaillard and Clemens Heske and Thomas F. Jaramillo} } @article {1190, title = {Photoelectrochemical water splitting using strain-balanced multiple quantum well photovoltaic cells}, journal = {Sustainable Energy Fuels}, volume = {3}, year = {2019}, pages = {2837-2844}, abstract = {Starting from the classical GaInP/GaAs tandem photoelectrochemical water splitting device, higher solar-to-hydrogen efficiencies can be pursued by extending photon absorption to longer wavelengths. We incorporate strain-balanced GaInAs/GaAsP quantum wells into the bottom GaAs junction, to increase the range of photon absorption. The inclusion of 1.34 eV quantum wells in the depletion region of the bottom cell extends the absorption edge to 930 nm. With a corresponding increase in the thickness of the top cell for current matching, the light-limiting photocurrent increases by >8\%. The estimated solar-to-hydrogen efficiency is 13.6 {\textpm} 0.5\%, and we show a pathway to further improvement. With the semiconductor device remaining on the growth substrate, this quantum well architecture may enable improved stability and durability of the photoelectrochemical electrodes.}, keywords = {durability, National Renewable Energy Lab (NREL), PEC, photoelectrochemical water splitting}, doi = {10.1039/C9SE00276F}, url = {http://dx.doi.org/10.1039/C9SE00276F}, author = {Steiner, Myles A. and Barraugh, Collin D. and Aldridge, Chase W. and Alvarez, Isabel Barraza and Friedman, Daniel J. and Ekins-Daukes, Nicholas J. and Deutsch, Todd G. and Young, James L.} } @article {1069, title = {Performance enhancement of PEM electrolyzers through iridium-coated titanium porous transport layers}, journal = {Electrochemistry Communications}, volume = {97}, year = {2018}, month = {12/2018}, pages = {96-99}, abstract = {

Published on December 1st, 2018. Titanium-based porous transport layers (PTL) used in polymer electrolyte membrane (PEM) water electrolyzers suffer from surface passivation (titanium oxidation), which increases the interface resistance between the PTL and electrode. For long-term operation, PTLs are typically coated with considerable amounts of platinum or gold to ensure reasonable performance profiles over time. Moreover, it is well known that the oxide forms of platinum and gold are not stable under electrolysis conditions. In this study, an easy and scalable method is introduced to protect the titanium PTL from passivation by sputtering very thin layers of iridium onto commercially-available titanium PTLs. The iridium layer reduces the overall ohmic resistance of the PTL/catalyst layer interface and improves the cell{\textquoteright}s performance to that achieved with carbon-based PTLs. The coating process homogeneously deposited iridium throughout the inner structure of the PTL. The findings of this study may lead to the use of iridium as a protective layer for titanium PTLs, potentially enable operation at increased cell voltages and lead to increased electrolyzer durability.

}, issn = {1388-2481}, doi = {10.1016/j.elecom.2018.10.021}, url = {http://www.sciencedirect.com/science/article/pii/S1388248118302741}, author = {Chang Liu and Marcelo Carmo and Guido Bender and Andreas Everwand and Thomas Lickert and James L. Young and Tom Smolinka and Detlef Stolten and Werner Lehnert} } @article {988, title = {Self-optimizing, highly surface-active layered metal dichalcogenide catalysts for hydrogen evolution}, journal = {Nature Energy}, volume = {6}, year = {2017}, note = {

{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n\ \n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright}

}, pages = {17127}, author = {Yuanyue Liu and Jingjie Wu and Ken P Hackenberg and Y. Morris Wang and Yingchao Yang and Kunttal Keyshar and Jing Gu and Tadashi Ogitsu and Robert Vajtai and Jun Lou and Pulickel M. Ajayan and Brandon C. Wood and Boris I. Yakobson} } @article {978, title = {Solar photochemical{\textendash}thermal water splitting at 140 {\textdegree}C with Cu-loaded TiO 2}, journal = {Energy \& Environmental Science}, volume = {10}, year = {2017}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {628-640}, issn = {1754-5692, 1754-5706}, doi = {10.1039/C6EE02974D}, url = {http://xlink.rsc.org/?DOI=C6EE02974D}, author = {Son Docao and Agni Raj Koirala and Min Gyu Kim and In Chul Hwang and Mee Kyung Song and Kyung Byung Yoon} } @inbook {749, title = {Application of SR methods for the study of nanocomposite materials for Hydrogen Energy}, volume = {84}, year = {2016}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {397-406}, publisher = {Elsevier Science Bv}, organization = {Elsevier Science Bv}, address = {Amsterdam}, abstract = {This work summarizes results of synchrotron radiation (SR) studies of the real/defect structure of nanocrystalline/nanocomposite oxide materials, which determines their functional properties in hydrogen energy field as catalysts and mixed ionic electronic conductors (cathodes and anodes of solid oxide fuel cells, oxygen separation membranes). For nanocrystalline ceria-zirconia mixed oxide prepared via modified Pechini route using ethanol solution of reagents, a high spatial uniformity of cations distribution between domains along with the oxygen sublattice deficiency revealed by full-profile Rietveld refinement of SR diffraction data provide structure disordering enhancing oxygen mobility. For PrNi0.5Co0.5O3-delta - Ce0.9Y0.1O2-delta nanocomposite extensive transfer of Pr cations into fluorite domains generates a new path of fast oxygen diffusion along chains of Pr3+ - Pr4+ cations as directly proved by analysis of the unit cell relaxation after changing pO(2) in perfect agreement with data obtained by oxygen isotope heteroexchange. (C) 2016 The Authors. Published by Elsevier B.V.}, author = {V. A. Sadykov and S. N. Pavlova and Z. S. Vinokurov and A. N. Shmakov and N. F. Eremeev and Yu E. Fedorova and E. P. Yakimchuk and V. V. Kriventsov and V. A. Bolotov and Yu Yu Tanashev and E. M. Sadovskaya and S. V. Cherepanova and K. V. Zolotarev and N. A. Vinokurov and B. A. Knyazev} } @article {865, title = {Critical limitations on the efficiency of two-step thermochemical cycles}, journal = {Solar Energy}, volume = {123}, year = {2016}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {57-73}, abstract = {Published in January 2016. *The authors bring to attention the need for standardizing methods to evaluate material performance, and propose a modeling framework from which to accomplish this.}, issn = {0038092X}, doi = {10.1016/j.solener.2015.09.036}, url = {http://linkinghub.elsevier.com/retrieve/pii/S0038092X15005228}, author = {Colby Jarrett and William Chueh and Cansheng Yuan and Yoshiaki Kawajiri and Kenneth H. Sandhage and Asegun Henry} } @article {773, title = {X-ray absorption study of ceria nanorods promoting the disproportionation of hydrogen peroxide}, journal = {ChemComm}, volume = {52}, year = {2016}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {5003-5006}, abstract = {A quasi in situ X-ray absorption study demonstrated that the disproportionation of hydrogen peroxide (H2O2) promoted by ceria nanorods was associated with a reversible Ce3+/Ce4+ reaction and structural transformations in ceria. The direction of this reversible reaction was postulated to depend on the H2O2 concentration and the fraction of Ce3+ species in ceria nanorods.}, doi = {10.1039/c5cc10643e}, author = {Wu Tai-Sing and Zhou Yunyun and Sabirianov Renat and Mei Wai-Ning and Soo Yun-Liang and Cheung Chin} } @article {856, title = {A new solar fuels reactor concept based on a liquid metal heat transfer fluid: Reactor design and efficiency estimation}, journal = {Solar Energy}, volume = {122}, year = {2015}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {547-561}, abstract = {Published in December 2015.}, issn = {0038092X}, doi = {10.1016/j.solener.2015.08.019}, url = {http://linkinghub.elsevier.com/retrieve/pii/S0038092X15004557}, author = {Cansheng Yuan and Colby Jarrett and William Chueh and Yoshiaki Kawajiri and Asegun Henry} } @article {811, title = {Ceria{\textendash}zirconia solid solutions (Ce1{\textendash}xZrxO2-δ, x<=0.2) for solar thermochemical water splitting: A thermodynamic study}, journal = {Chemistry of Materials}, volume = {26}, year = {2014}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {6073-6082}, abstract = {Published on October 28th, 2014.}, issn = {0897-4756, 1520-5002}, doi = {10.1021/cm503131p}, url = {http://pubs.acs.org/doi/abs/10.1021/cm503131p}, author = {Yong Hao and Chih-Kai Yang and Sossina M. Haile} } @article {915, title = {High-temperature isothermal chemical cycling for solar-driven fuel production}, journal = {Physical Chemistry Chemical Physics}, volume = {15}, year = {2013}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {17084}, issn = {1463-9076, 1463-9084}, doi = {10.1039/c3cp53270d}, url = {http://xlink.rsc.org/?DOI=c3cp53270d}, author = {Yong Hao and Chih-Kai Yang and Sossina M. Haile} } @article {789, title = {Density Functional Theory Modeling of MnO 2 Polymorphs as Cathodes for Multivalent Ion Batteries}, journal = {The Journal of Physical Chemistry C}, volume = {122}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {8788-8795}, issn = {1932-7447, 1932-7455}, doi = {10.1021/acs.jpcc.8b00918}, url = {http://pubs.acs.org/doi/10.1021/acs.jpcc.8b00918}, author = {Taylor R. Juran and Joshua Young and Manuel Smeu} } @article {775, title = {Effect of local coordination of Mn on Mn-L-2,L-3 edge electron energy loss spectrum}, journal = {JOURNAL OF APPLIED PHYSICS}, volume = {114}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {054906}, abstract = {The effects of the local coordination environment of Mn ions in perovskite manganese oxides on the Mn-L-2,L-3 edge electron energy loss (EEL) spectra was experimentally and theoretically investigated. The Mn-L-2,L-3 edge EEL spectra were observed for various perovskite manganese oxides, including YMnO3, LaMnO3, BaMnO3, SrMnO3, and CaMnO3, in which the Mn ions have different valence states and local coordination. The experiment revealed that the Mn L-3/L-2 ratio is influenced not only by the valence state but also by the local environment of the Mn ions. Furthermore, compared to the Mn-L-3/L-2 ratios of Mn3+ compounds, the Mn L-3/L-2 ratios of the Mn4+ compounds are found to be much more sensitive to local distortions. The ab-initio multiplet calculation of the Mn-L-2,L-3 edge EEL spectra revealed that the effects of local coordination on the spectral features are dependent on the local electronic structures of the Mn ions. These findings indicate that the valence state as well as the local environments of the Mn ions can be unraveled by combining experimental and theoretical investigations of Mn-L-2,L-3 edge EEL spectra. (C) 2013 AIP Publishing LLC.}, issn = {0021-8979}, doi = {10.1063/1.4817425}, author = {S Nishida and S Kobayashi and A Kumamoto and H Ikeno and T Mizoguchi and I Tanaka and Y Ikuhara and T Yamamoto} } @article {1023, title = {Electrochemical investigation of electrocatalysts for the oxygen evolution reaction in PEM water electrolyzers}, journal = {International Journal of Hydrogen Energy}, volume = {33}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {4955-4961}, abstract = {To develop the proton exchange membrane water electrolyzer (PEMWE) with satisfactory performance and durability for application in a regenerative fuel cell (RFC) system, anode electrocatalysts of Ir, Ru and their oxides were prepared and incorporated into the catalyst coated membranes (CCM) of the PEMWE. Repetitive cyclic voltammetry of the Nafion bonded electrodes, steady state polarization curves and stability testing of the single PEMWE cells were performed to investigate the performance and stability of these electrocatalysts. The structure and specific surface areas of the electrocatalysts were characterized by XRD and BET. IrO2 exhibited a slightly lower performance but a markedly higher stability than the other electrocatalysts. By modifying the preparation process via a colloidal iridium hydroxide hydrate precursor, which permitted a lower heat treatment temperature, its performance was enhanced, corresponding to a terminal voltage of 1.63V at 1A/cm2.}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2008.06.039}, url = {http://www.sciencedirect.com/science/article/pii/S0360319908007520}, author = {Shidong Song and Huamin Zhang and Xiaoping Ma and Zhigang Shao and Richard T. Baker and Baolian Yi} } @article {1017, title = {Experimental study on porous current collectors of PEM electrolyzers}, journal = {International Journal of Hydrogen Energy}, volume = {37}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {7418-7428}, abstract = {Experimental study on proton exchange membrane (PEM) electrolyzer was carried out focusing on the effect of pore structural properties of current collectors, such as porosity and pore diameter. Various titanium (Ti)-felt substrates with different porosities and pore diameters (measured by capillary flow porometry) were used as the anode current collector. Results show that when the mean pore diameter of the current collector was larger than 10μm, the electrolysis performance improved with decreasing pore diameter. In contrast, changes in porosity had no significant effect on the cell performance when the porosity exceeded 0.50. The flow pattern of two-phase flow in the flow channel was discussed in terms of its relationship to bubble size and to pore diameter of the current collector. Finally, correlation between the calculated membrane resistance and the measured pore diameter of the current collectors suggest that larger bubbles generated from larger pores tend to become long bubbles in the channel, thus hindering the water supply to the membrane.}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2012.01.095}, url = {http://www.sciencedirect.com/science/article/pii/S0360319912001917}, author = {Hiroshi Ito and Tetsuhiko Maeda and Akihiro Nakano and Chul Min Hwang and Masayoshi Ishida and Atsushi Kato and Tetsuya Yoshida} } @article {1014, title = {Investigations on degradation of the long-term proton exchange membrane water electrolysis stack}, journal = {Journal of Power Sources}, volume = {267}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {515-520}, abstract = {A 9-cell proton exchange membrane (PEM) water electrolysis stack is developed and tested for 7800~h. The average degradation rate of 35.5~μV~h-1 per cell is measured. The 4th MEA of the stack is offline investigated and characterized. The electrochemical impedance spectroscopy (EIS) shows that the charge transfer resistance and ionic resistance of the cell both increase. The linear sweep scan (LSV) shows the hydrogen crossover rate of the membrane has slight increase. The electron probe X-ray microanalyze (EPMA) illustrates further that Ca, Cu and Fe elements distribute in the membrane and catalyst layers of the catalyst-coated membranes (CCMs). The cations occupy the ion exchange sites of the Nafion polymer electrolyte in the catalyst layers and membrane, which results in the increase in the anode and the cathode overpotentials. The metallic impurities originate mainly from the feed water and the components of the electrolysis unit. Fortunately, the degradation was reversible and can be almost recovered to the initial performance by using 0.5~M H2SO4. This indicates the performance degradation of the stack running 7800~h is mainly caused by a recoverable contamination.}, issn = {0378-7753}, doi = {10.1016/j.jpowsour.2014.05.117}, url = {http://www.sciencedirect.com/science/article/pii/S0378775314008106}, author = {Shucheng Sun and Zhigang Shao and Hongmei Yu and Guangfu Li and Baolian Yi} } @article {959, title = {Maximizing fuel production rates in isothermal solar thermochemical fuel production}, journal = {Applied Energy}, volume = {183}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {1098-1111}, issn = {03062619}, doi = {10.1016/j.apenergy.2016.09.012}, url = {http://linkinghub.elsevier.com/retrieve/pii/S0306261916313162}, author = {Timothy C. Davenport and Chih-Kai Yang and Christopher J. Kucharczyk and Michael J. Ignatowich and Sossina M. Haile} } @article {890, title = {Reactive ceramics of CeO2{\textendash}MOx (M=Mn, Fe, Ni, Cu) for H2 generation by two-step water splitting using concentrated solar thermal energy}, journal = {Energy}, volume = {32}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {656-663}, issn = {03605442}, doi = {10.1016/j.energy.2006.05.002}, url = {http://linkinghub.elsevier.com/retrieve/pii/S0360544206001186}, author = {H Kaneko and T Miura and H Ishihara and S Taku and T Yokoyama and H Nakajima and Y Tamaura} } @article {1004, title = {Solar-to-hydrogen efficiency: shining light on photoelectrochemical device performance}, journal = {Energy \& Environmental Science}, volume = {9}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {74-80}, abstract = {Illumination characteristics from artificial sources strongly influence the experimental performance of solar water-splitting devices, with the highest impact on tandem structures designed for optimum conversion efficiency. We highlight quantitative and qualitative flaws of common characterization techniques, discuss their impact on research results and strategy, and demonstrate approaches toward advanced measurement accuracy.}, issn = {1754-5706}, doi = {10.1039/C5EE03206G}, url = {http://pubs.rsc.org/en/content/articlelanding/2016/ee/c5ee03206g}, author = {H. D{\"o}scher and J. L. Young and J. F. Geisz and J. A. Turner and T. G. Deutsch} } @article {757, title = {Structural Change of the Mn Cluster during the S2{\textrightarrow}S3 State Transition of the Oxygen-Evolving Complex of Photosystem II. Does It Reflect the Onset of Water/Substrate Oxidation? Determination by Mn X-ray Absorption Spectroscopy}, journal = {Journal of the American Chemical Society}, volume = {122}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {3399-3412}, abstract = {The oxygen-evolving complex of Photosystem II in plants and cyanobacteria catalyzes the oxidation of two water molecules to one molecule of dioxygen. A tetranuclear Mn complex is believed to cycle through five intermediate states (S0-S4) to couple the four-electron oxidation of water with the one-electron photochemistry occurring at the Photosystem II reaction center. We have used X-ray absorption spectroscopy to study the local structure of the Mn complex and have proposed a model for it, based on studies of the Mn K-edges and the extended X-ray absorption fine structure of the S1 and S2 states. The proposed model consists of two di-μ-oxo-bridged binuclear Mn units with Mn-Mn distances of \~{}2.7 {\r A} that are linked to each other by a mono-μ-oxo bridge with a Mn-Mn separation of \~{}3.3 {\r A}. The Mn-Mn distances are invariant in the native S1 and S2 states. This report describes the application of X-ray absorption spectroscopy to S3 samples created under physiological conditions with saturating flash illumination. Significant changes are observed in the Mn-Mn distances in the S3 state compared to the S1 and the S2 states. The two 2.7 {\r A} Mn-Mn distances that characterize the di-μ-oxo centers in the S1 and S2 states are lengthened to \~{}2.8 and 3.0 {\r A} in the S3 state, respectively. The 3.3 {\r A} Mn-Mn and Mn-Ca distances also increase by 0.04-0.2 {\r A}. These changes in Mn-Mn distances are interpreted as consequences of the onset of substrate/water oxidation in the S3 state. Mn-centered oxidation is evident during the S0{\textrightarrow}S1 and S1{\textrightarrow}S2 transitions. We propose that the changes in Mn-Mn distances during the S2{\textrightarrow}S3 transition are the result of ligand or water oxidation, leading to the formation of an oxyl radical intermediate formed at a bridging or terminal position. The reaction of the oxyl radical with OH-, H2O, or an oxo group during the subsequent S state conversion is proposed to lead to the formation of the O-O bond. Models that can account for changes in the Mn-Mn distances in the S3 state and the implications for the mechanism of water oxidation are discussed.}, issn = {0002-7863}, doi = {10.1021/ja992501u}, url = {https://doi.org/10.1021/ja992501u}, author = {Wenchuan Liang and Theo A. Roelofs and Roehl M. Cinco and Annette Rompel and Matthew J. Latimer and Wa O. Yu and Kenneth Sauer and Melvin P. Klein and Vittal K. Yachandra} } @article {780, title = {Surface Defect Chemistry and Electronic Structure of Pr 0.1 Ce 0.9 O 2-δ Revealed in Operando}, journal = {Chemistry of Materials}, volume = {30}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {2600-2606}, issn = {0897-4756, 1520-5002}, doi = {10.1021/acs.chemmater.7b05129}, url = {http://pubs.acs.org/doi/10.1021/acs.chemmater.7b05129}, author = {Qiyang Lu and Gulin Vardar and Maximilian Jansen and Sean R. Bishop and Iradwikanari Waluyo and Harry L. Tuller and Bilge Yildiz} } @article {875, title = {Thermochemical hydrogen production by a redox system of ZrO2-supported Co(II)-ferrite}, journal = {Solar Energy}, volume = {78}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {623-631}, issn = {0038092X}, doi = {10.1016/j.solener.2004.04.008}, url = {http://linkinghub.elsevier.com/retrieve/pii/S0038092X04000830}, author = {T. Kodama and Y. Kondoh and R. Yamamoto and H. Andou and N. Satou} } @article {881, title = {Thermochemical Two-Step Water Splitting by ZrO2-supported NixFe3-xO4 for Solar Hydrogen Production}, journal = {Solar Energy}, volume = {82}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {73-79}, issn = {0038092X}, doi = {10.1016/j.solener.2007.03.005}, url = {http://linkinghub.elsevier.com/retrieve/pii/S0038092X07000783}, author = {T. Kodama and N. Gokon and R. Yamamoto} } @article {950, title = {Thermodynamic and kinetic assessments of strontium-doped lanthanum manganite perovskites for two-step thermochemical water splitting}, journal = {Journal of Materials Chemistry A}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, issn = {2050-7488, 2050-7496}, doi = {10.1039/C4TA02694B}, url = {http://xlink.rsc.org/?DOI=C4TA02694B}, author = {Chih-Kai Yang and Yoshihiro Yamazaki and Aykut Aydin and Sossina M. Haile} } @article {834, title = {Understanding Chemical Expansion in Non-Stoichiometric Oxides: Ceria and Zirconia Case Studies}, journal = {Advanced Functional Materials}, volume = {22}, note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright} }, pages = {1958-1965}, issn = {1616301X}, doi = {10.1002/adfm.201102648}, url = {http://doi.wiley.com/10.1002/adfm.201102648}, author = {Dario Marrocchelli and Sean R. Bishop and Harry L. Tuller and Bilge Yildiz} }