@article {1020,
	title = {Durable Membrane Electrode Assemblies for Proton Exchange Membrane Electrolyzer Systems Operating at High Current Densities},
	journal = {Electrochimica Acta},
	volume = {210},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {502-511},
	abstract = {High efficiencies, wide operation range and rapid response time have motivated the recent interest in proton exchange membrane (PEM) electrolysis for hydrogen generation with surplus electricity. However, degradation at high current densities and the associated mechanism has not been thoroughly explored so far. In this work, membrane electrode assemblies (MEA) from different suppliers are aged in a commercial PEM electrolyzer (2.5Nm3H2h--1), operating up to 4Acm--2 for more than 750h. In all cases, the cell voltage (Ecell) decreases during the testing period. Interestingly, the cells with Ir-black anodes exhibit the highest performance with the lowest precious metal loading (1mgcm-2). Electrochemical impedance spectroscopy (EIS) shows a progressive decrease in the specific exchange current, while the ohmic resistance decreases when doubling the nominal current density. This effect translates into an enhancement of cell efficiency at high current densities. However, Ir concurrently leaches out and diffuses into the membrane. No decrease in membrane thickness is observed at the end of the tests. High current densities do not lead to lowering the performance of the PEM electrolyzer over time, although MEA components degrade, in particular the anode.},
	issn = {0013-4686},
	doi = {10.1016/j.electacta.2016.04.164},
	url = {http://www.sciencedirect.com/science/article/pii/S0013468616310167},
	author = {P. Lettenmeier and R. Wang and R. Abouatallah and S. Helmly and T. Morawietz and R. Hiesgen and S. Kolb and F. Burggraf and J. Kallo and A. S. Gago and K. A. Friedrich}
}
@article {1010,
	title = {Low-Cost and Durable Bipolar Plates for Proton Exchange Membrane Electrolyzers},
	journal = {Scientific Reports},
	volume = {7},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {44035},
	abstract = {Cost reduction and high efficiency are the mayor challenges for sustainable H2 production via proton exchange membrane (PEM) electrolysis. Titanium-based components such as bipolar plates (BPP) have the largest contribution to the capital cost. This work proposes the use of stainless steel BPPs coated with Nb and Ti by magnetron sputtering physical vapor deposition (PVD) and vacuum plasma spraying (VPS), respectively. The physical properties of the coatings are thoroughly characterized by scanning electron, atomic force microscopies (SEM, AFM); and X-ray diffraction, photoelectron spectroscopies (XRD, XPS). The Ti coating (50 μm) protects the stainless steel substrate against corrosion, while a 50-fold thinner layer of Nb decreases the contact resistance by almost one order of magnitude. The Nb/Ti-coated stainless steel bipolar BPPs endure the harsh environment of the anode for more than 1000 h of operation under nominal conditions, showing a potential use in PEM electrolyzers for large-scale H2 production from renewables.},
	issn = {2045-2322},
	doi = {10.1038/srep44035},
	url = {https://www.nature.com/articles/srep44035},
	author = {P. Lettenmeier and R. Wang and R. Abouatallah and B. Saruhan and O. Freitag and P. Gazdzicki and T. Morawietz and R. Hiesgen and A. S. Gago and K. A. Friedrich}
}
