@article {1181, title = {Advancement of Proton-Conducting Solid Oxide Fuel Cells and Solid Oxide Electrolysis Cells at Idaho National Laboratory (INL)}, journal = {ECS Transactions}, volume = {91}, year = {2019}, month = {07/2019}, pages = {1029{\textendash}1034}, abstract = {Proton conducting ceramics have been considered as a strategic material system used in solid oxide fuel cells and solid oxide electrolysis cells for electricity generation and hydrogen production. The high proton conductivity of protonic electrolyte and rapid development of robust electrode materials have significantly promoted the reduction of feasible operating temperature to intermediate temperature range (400 600 {\textdegree}C), which can attribute to favorable technical and economic advantages when they are compared with conventional oxide-ion conducting electrolyte based solid oxide cell system. In the past few years, Idaho National Laboratory has been devoted to developing advanced electrolyte and electrode materials R\&D, diverse manufacturing capability, and expanding evaluation facility for these applications, aiming to further improve performance, stability and manufacturing cost. There are some remarkable accomplishments achieved on electrode engineering, electrolyte optimization, new material down-selection and large-scale cell fabrication in Idaho National Laboratory.}, keywords = {BCZYYb7111, HTE, NiO-BaCe0.7Zr0.1Y0.1Yb0.1O3, PrBa0.5Sr0.5Co1.5Fe0.5O3, Protonic conductor, SOEC}, doi = {10.1149/09101.1029ecst}, url = {https://doi.org/10.1149/09101.1029ecst}, author = {Hanping Ding and Wei Wu and Dong Ding} } @article {1063, title = {Hydrogen Production: 3D Self-Architectured Steam Electrode Enabled Efficient and Durable Hydrogen Production in a Proton-Conducting Solid Oxide Electrolysis Cell at Temperatures Lower Than 600 {\textdegree}C (Adv. Sci. 11/2018)}, journal = {Advanced Science}, volume = {5}, year = {2018}, month = {2018}, pages = {1870070}, abstract = {

In article number 1800360, Dong Ding and co-workers report a self-architectured ultraporous 3D electrode for steam electrolysis at intermediate temperatures. The proton-conducting electrolysis cell using this steam electrode demonstrates highly efficient and durable hydrogen production below 600 {\textdegree}C, which is attributed to improved mass transfer and increased active reaction area, as well as the electrode reconstruction under operation conditions.

}, issn = {2198-3844}, doi = {10.1002/advs.201870070}, url = {https://onlinelibrary.wiley.com/doi/abs/10.1002/advs.201870070}, author = {Wei Wu and Hanping Ding and Yunya Zhang and Yong Ding and Prashant Katiyar and Prasun K. Majumdar and Ting He and Dong Ding} }