@article {798,
	title = {Low-Cost, Efficient, and Durable H2 Production by Photoelectrochemical Water Splitting with CuGa3Se5 Photocathodes},
	journal = {ACS Applied Materials \& Interfaces},
	volume = {10},
	year = {2018},
	note = {<p>{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright} {\textquoteright}\n - jyoungstrom{\textquoteright} {\textquoteright}Jason thinks this is great.\n\&nbsp;\n - jyoungstrom{\textquoteright} {\textquoteright}\n - estechel{\textquoteright}</p>},
	pages = {19573-19579},
	abstract = {<p>Published on June 13th, 2018. Photoelectrochemical (PEC) water splitting is an elegant method of converting sunlight and water into H2 fuel. To be commercially advantageous, PEC devices must become cheaper, more efficient, and much more durable. This work examines low-cost polycrystalline chalcopyrite films, which are successful as photovoltaic absorbers, for application as PEC absorbers. In particular, Cu{\textendash}Ga{\textendash}Se films with wide band gaps can be employed as top cell photocathodes in tandem devices as a realistic route to high efficiencies. In this report, we demonstrate that decreasing Cu/Ga composition from 0.66 to 0.31 in Cu{\textendash}Ga{\textendash}Se films increased the band gap from 1.67 to 1.86 eV and decreased saturated photocurrent density from 18 to 8 mA/cm2 as measured by chopped-light current{\textendash}voltage (CLIV) measurements in a 0.5 M sulfuric acid electrolyte. Buffer and catalyst surface treatments were not applied to the Cu{\textendash}Ga{\textendash}Se films, and they exhibited promising stability, evidenced by unchanged CLIV after 9 months of storage in air. Finally, films with Cu/Ga = 0.36 (approximately stoichiometric CuGa3Se5) and 1.86 eV band gaps had exceptional durability and continuously split water for 17 days (\~{}12 mA/cm2 at -1 V vs RHE). This is equivalent to \~{}17\&thinsp;200 C/cm2, which is a world record for any polycrystalline PEC absorber. These results indicate that CuGa3Se5 films are prime candidates for cheaply achieving efficient and durable PEC water splitting.</p>},
	issn = {1944-8244},
	doi = {10.1021/acsami.8b01447},
	url = {https://doi.org/10.1021/acsami.8b01447},
	author = {Christopher P. Muzzillo and W. Ellis Klein and Zhen Li and Alexander Daniel DeAngelis and Kimberly Horsley and Kai Zhu and Nicolas Gaillard}
}
