@article {1140,
	title = {Formation of 6H-Ba3Ce0.75Mn2.25O9 During Thermochemical Reduction of 12R-Ba4CeMn3O12: Identification of a Polytype in the Ba(Ce,Mn)O3 Family},
	journal = {Inorganic Chemistry},
	volume = {61},
	year = {2022},
	month = {4},
	keywords = {analytical chemistry, inorganic, layered perovskite, organic, oxide, physical, polytype, STCH, thermochemistry},
	doi = {10.1021/acs.inorgchem.2c00282},
	author = {Strange, Nicholas A. and Park, James Eujin and Goyal, Anuj and Bell, Robert T. and Trindell, Jamie A. and Sugar, Joshua D. and Stone, Kevin H. and Coker, Eric N. and Lany, Stephan and Shulda, Sarah and Ginley, David S.}
}
@article {1142,
	title = {Intermediate Temperature Solid Oxide Cell with a Barrier Layer Free Oxygen Electrode and Phase Inversion Derived Hydrogen Electrode},
	journal = {Journal of the Electrochemical Society},
	volume = {169},
	year = {2022},
	month = {3},
	keywords = {area specific resistance, cathode, electrical conductivity, intermediate temperature-operating solid oxide fuel cell, layered perovskite},
	doi = {10.1149/1945-7111/ac565a},
	author = {Zhang, Yongliang and Xu, Nansheng and Tang, Qiming and Huang, Kevin}
}
@article {1148,
	title = {Revitalizing interface in protonic ceramic cells by acid etch},
	journal = {Nature},
	volume = {604},
	year = {2022},
	month = {04},
	pages = {479-485},
	keywords = {acid treatment, ceramic fuel-cell, electrolysis, high-temperature annealed electrolyte surface, proton conductivity, Protonic ceramic electrochemical cells},
	doi = {10.1038/s41586-022-04457-y},
	author = {Bian, Wenjuan and Wu, Wei and Wang, Baoming and Tang, Wei and Zhou, Meng and Jin, Congrui and Ding, Hanping and Fan, Weiwei and Dong, Yanhao and Li, Ju and Ding, Dong}
}
@article {1149,
	title = {Spatially resolved performance and degradation in a perfluorinated anion exchange membrane fuel cell},
	journal = {Electrochimica Acta},
	volume = {406},
	year = {2022},
	pages = {139812},
	abstract = {Anion exchange membrane fuel cells may enable future operation with non-precious metal-based catalysts. These systems have a delicate sensitivity to operating conditions such as humidification levels and the presence of CO2 in the air oxidant stream. We present spatially resolved in-situ performance results that shed light on phenomena that are unique to anion exchange membrane fuel cells. For cell construction, a highly conductive perfluorinated anion exchange polymer was used as the membrane and the material in powder form as the ionomer. Experiments were conducted to investigate the effects of humidification, fuel/oxidant concentration, and carbonation effects on the performance and its distribution in the cell. The results indicated that (i) dry conditions at the cathode have a stronger effect than at the anode on overall cell performance, (ii) performance significantly suffered when humidification was below 90\%, (iii) fuel and oxidant dilution effects lead mass-transport losses and were stronger than flow rate effects, (iv) CO2 in the cathode feed stream creates an equilibration disparity between the inlet and outlet sections and CO2 purging is affected by flooding conditions, and (v) after >500~h of operation, performance deteriorates predominantly at the inlet.},
	keywords = {2+1D fuel cell model, Anion Exchange membranes, Cathode dry-out, CO poisoning, Fuel cell durability, Mass transport limitations, Segmented fuel cell},
	issn = {0013-4686},
	doi = {https://doi.org/10.1016/j.electacta.2021.139812},
	url = {https://www.sciencedirect.com/science/article/pii/S0013468621020958},
	author = {Ashutosh G. Divekar and Michael R. Gerhardt and Christopher M. Antunes and Luigi Osmieri and Ami C. Yang-Neyerlin and Adam Z. Weber and Bryan S. Pivovar and Guido Bender and Andrew M. Herring}
}
@article {1155,
	title = {Elucidating the Role of Hydroxide Electrolyte on Anion-Exchange-Membrane Water Electrolyzer Performance},
	journal = {Journal of The Electrochemical Society},
	volume = {168},
	year = {2021},
	month = {05/2021},
	pages = {054522},
	abstract = {Many solid-state devices, especially those requiring anion conduction, often add a supporting electrolyte to enable efficient operation. The prototypical case is that of anion-exchange-membrane water electrolyzers (AEMWEs), where addition of an alkali metal solution improves performance. However, the specific mechanism of this performance improvement is currently unknown. This work investigates the functionality of the alkali metal solution in AEMWEs using experiments and mathematical models. The results show that additional hydroxide plays a key role not only in ohmic resistance of the membrane and catalyst layer but also in the reaction kinetics. The modeling suggests that the added liquid electrolyte creates an additional electrochemical interface with the electrocatalyst that provides ion-transport pathways and distributes product gas bubbles; the total effective electrochemical active surface area in the cell with 1 M KOH is 5 times higher than that of the cell with DI water. In the cell with 1 M KOH, more than 80\% of the reaction current is associate with the liquid electrolyte. These results indicate the importance of high pH of electrolyte and catalyst/electrolyte interface in AEMWEs. The understanding of the functionality of the alkali metal solution presented in this study should help guide the design and optimization of AEMWEs.},
	keywords = {alkali metal solutions, anion-exchange-membrane water electrolyzers, Energy Sciences, energy storage, liquid electrolyte, solid-state devices},
	issn = {0013-4651},
	doi = {10.1149/1945-7111/ac0019},
	author = {Jiangjin Liu and Zhenye Kang and Dongguo Li and Magnolia Pak and Shaun M. Alia and Cy Fujimoto and Guido Bender and Yu Seung Kim and Adam Z. Weber}
}
@article {1168,
	title = {Deconvolution of Water-Splitting on the Triple-Conducting Ruddlesden{\textendash}Popper-Phase Anode for Protonic Ceramic Electrolysis Cells},
	journal = {ACS Applied Materials \& Interfaces},
	volume = {12},
	year = {2020},
	note = {PMID: 33079527},
	pages = {49574-49585},
	keywords = {atomic layer, proton conductors, relaxation time distribution, ruddlesden-popper phase, steam electrolysis, triple-conducting},
	doi = {10.1021/acsami.0c12987},
	url = {https://doi.org/10.1021/acsami.0c12987},
	author = {Tian, Hanchen and Li, Wenyuan and Ma, Liang and Yang, Tao and Guan, Bo and Shi, Wangying and Kalapos, Thomas L. and Liu, Xingbo}
}
@article {1183,
	title = {Direct Deposition of Crystalline Ta3N5 Thin Films on FTO for PEC Water Splitting},
	journal = {ACS Applied Materials \& Interfaces},
	volume = {11},
	year = {2019},
	pages = {15457-15466},
	keywords = {ALD, CVD, FTO, PEC, Photoanode, Ta3N5, Tantalum nitride},
	doi = {10.1021/acsami.8b21194},
	url = {https://doi.org/10.1021/acsami.8b21194},
	author = {Hajibabaei, Hamed and Little, Daniel J. and Pandey, Ayush and Wang, Dunwei and Mi, Zetian and Hamann, Thomas W.}
}
@article {1186,
	title = {High performance III-V photoelectrodes for solar water splitting via synergistically tailored structure and stoichiometry},
	journal = {Nature Communications},
	volume = {10},
	year = {2019},
	pages = {3388},
	keywords = {Ammonium sulfide surface passivation, Antireflection, Density graded surface, GaInP2, III-V, PEC, Photocathode},
	doi = {10.1038/s41467-019-11351-1},
	author = {Lim, Haneol and Young, James L. and Geisz, John F. and Friedman, Daniel J. and Deutsch, Todd G. and Yoon, Jongseung}
}
@article {1194,
	title = {Transition Metal Arsenide Catalysts for the Hydrogen Evolution Reaction},
	journal = {The Journal of Physical Chemistry C},
	volume = {123},
	year = {2019},
	pages = {24007-24012},
	keywords = {Arsenide catalyst, CoAs, Hydrogen evolution catalyst, MoAs, Modeling, PEC},
	doi = {10.1021/acs.jpcc.9b05738},
	url = {https://doi.org/10.1021/acs.jpcc.9b05738},
	author = {Gauthier, Joseph A. and King, Laurie A. and Stults, Faith Tucker and Flores, Raul A. and Kibsgaard, Jakob and Regmi, Yagya N. and Chan, Karen and Jaramillo, Thomas F.}
}
@article {1135,
	title = {Best Practices in Perovskite Solar Cell Efficiency Measurements. Avoiding the Error of Making Bad Cells Look Good},
	journal = {Journal of Physical Chemistry Letters},
	volume = {6},
	year = {2015},
	month = {03},
	pages = {852-857},
	keywords = {additive engineering, encapsulation, Perovskite, perovskite defects, perovskite degradation, perovskite solar cell, perovskite solar cell stability},
	doi = {10.1021/acs.jpclett.5b00289},
	author = {Christians, Jeffrey and Manser, Joseph and Kamat, Prashant}
}
@article {1134,
	title = {Assessing the Oxidative Stability of Anion Exchange Membranes in Oxygen Saturated Aqueous Alkaline Solutions},
	journal = {Frontiers in Energy Research},
	volume = {10},
	month = {2022},
	keywords = {anion exchange membrane, conductivity, electrolysis, protocol and guidelines, stability},
	doi = {10.3389/fenrg.2022.871851},
	author = {Arges, Christopher G. and Ramani, Vijay and Wang, Zhongyang and Ouimet, Ryan J.}
}
