@article {1140,
	title = {Formation of 6H-Ba3Ce0.75Mn2.25O9 During Thermochemical Reduction of 12R-Ba4CeMn3O12: Identification of a Polytype in the Ba(Ce,Mn)O3 Family},
	journal = {Inorganic Chemistry},
	volume = {61},
	year = {2022},
	month = {4},
	keywords = {analytical chemistry, inorganic, layered perovskite, organic, oxide, physical, polytype, STCH, thermochemistry},
	doi = {10.1021/acs.inorgchem.2c00282},
	author = {Strange, Nicholas A. and Park, James Eujin and Goyal, Anuj and Bell, Robert T. and Trindell, Jamie A. and Sugar, Joshua D. and Stone, Kevin H. and Coker, Eric N. and Lany, Stephan and Shulda, Sarah and Ginley, David S.}
}
@article {1117,
	title = {Factors Governing Oxygen Vacancy Formation in Oxide Perovskites},
	journal = {Journal of the American Chemical Society},
	volume = {143},
	year = {2021},
	pages = {13212-13227},
	doi = {ttps://doi.org/10.1021/jacs.1c05570},
	author = {R. B. Wexler and G. S. Gautam and E. B. Stechel and E. A. Carter}
}
@article {1126,
	title = {Favorable Redox Thermodynamics of SrTi0.5Mn0.5O3-δ in Solar Thermochemical Water Splitting},
	journal = {Chemistry of Materials},
	volume = {32},
	year = {2020},
	pages = {9335-9346},
	keywords = {Cubic perovskite, Modeling, Perovskite, SrTi0.5Mn0.5O3-δ},
	doi = {https://doi.org/10.1021/acs.chemmater.0c03278},
	author = {X. Qian and J. He and E. Mastronardo and B. Baldassarri and C. Wolverton and S. M. Haile}
}
@article {1129,
	title = {A First-Principles-Based Sub-Lattice Formalism for Predicting Off-Stoichiometry in Materials for Solar Thermochemical Applications: The Example of Ceria},
	journal = {Advanced Theory and Simulations},
	volume = {3},
	year = {2020},
	keywords = {off-stoichiometric materials, sub-lattice models, thermodynamic modeling},
	doi = {https://doi.org/10.1002/adts.202000112},
	author = {G. Sai Gautam and E. B. Stechel and E. A. Carter}
}
@article {1185,
	title = {Ferritic stainless steel interconnects for protonic ceramic electrochemical cell stacks: Oxidation behavior and protective coatings},
	journal = {International Journal of Hydrogen Energy},
	volume = {44},
	year = {2019},
	pages = {25297-25309},
	abstract = {Protonic ceramic fuel or electrolysis cells (PCFC/PCEC) have shown promising performance at intermediate temperatures. However, these technologies have not yet been demonstrated in a stack, hence the oxidation behavior of the metallic interconnect under relevant operating environments is unknown. In this work, ferritic stainless steels 430 SS, 441 SS, and Crofer 22 APU were investigated for their use as interconnect materials in the PCFC/PCEC stack. The bare metal sheets were exposed to a humidified air environment in the temperature range from 450~{\textdegree}C to 650~{\textdegree}C, to simulate their application in a PCFC cathode or PCEC anode. Breakaway oxidation with rapid weight gain and Fe outward diffusion/oxidation was observed on all the selected stainless steel materials. A protective coating is deemed necessary to prevent the metallic interconnect from oxidizing. To mitigate the observed breakaway oxidation, state-of-the-art protective coatings, Y2O3, Ce0.02Mn1.49Co1.49O4, CuMn1.8O4 and Ce/Co, were applied to the stainless steel sheets and their oxidation resistance was investigated. Dual atmosphere testing further validated the effectiveness of the protective coatings in realistic PCFC/PCEC environments, with a hydrogen gradient across the interconnect. Several combinations of metal and coating material were found to be viable for use as the interconnect for PCFC/PCEC stacks.},
	keywords = {Dual atmosphere, Interconnect oxidation, Oxidation, Protective coatings, Protonic ceramic electrolysis cell, Protonic ceramic fuel cell},
	issn = {0360-3199},
	doi = {https://doi.org/10.1016/j.ijhydene.2019.08.041},
	url = {https://www.sciencedirect.com/science/article/pii/S0360319919329581},
	author = {Ruofan Wang and Zhihao Sun and Jung-Pyung Choi and Soumendra N. Basu and Jeffry W. Stevenson and Michael C. Tucker}
}
@article {899,
	title = {Fuel production from CO<sub>2</sub> using solar-thermal energy: system level analysis},
	journal = {Energy \& Environmental Science},
	volume = {5},
	year = {2012},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {8417},
	issn = {1754-5692, 1754-5706},
	doi = {10.1039/c2ee21798h},
	url = {http://xlink.rsc.org/?DOI=c2ee21798h},
	author = {Jiyong Kim and Terry A. Johnson and James E. Miller and Ellen B. Stechel and Christos T. Maravelias}
}
@article {895,
	title = {Ferrite-YSZ composites for solar thermochemical production of synthetic fuels: in operando characterization of CO2 reduction},
	journal = {Journal of Materials Chemistry},
	volume = {21},
	year = {2011},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {10767{\textendash}10776},
	url = {http://pubs.rsc.org/en/content/articlehtml/2011/jm/c1jm11053e},
	author = {E. N. Coker and A. Ambrosini and M. A. Rodriguez and J. E. Miller}
}
@article {767,
	title = {Fabrication and testing of CONTISOL: A new receiver-reactor for day and night solar thermochemistry},
	journal = {Applied Thermal Engineering},
	volume = {127},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {46-57},
	issn = {13594311},
	doi = {10.1016/j.applthermaleng.2017.08.001},
	url = {http://linkinghub.elsevier.com/retrieve/pii/S1359431116328502},
	author = {Justin L. Lapp and Matthias Lange and Ren{\'e} Rieping and Lamark de Oliveira and Martin Roeb and Christian Sattler}
}
@article {935,
	title = {Factors affecting the efficiency of solar driven metal oxide thermochemical cycles},
	journal = {Industrial \& Engineering Chemistry Research},
	volume = {52},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {3276-3286},
	issn = {0888-5885, 1520-5045},
	doi = {10.1021/ie400193q},
	url = {http://pubs.acs.org/doi/abs/10.1021/ie400193q},
	author = {Nathan P. Siegel and James E. Miller and Ivan Ermanoski and Richard B. Diver and Ellen B. Stechel}
}
@article {1015,
	title = {Failure of PEM water electrolysis cells: Case study involving anode dissolution and membrane thinning},
	journal = {International Journal of Hydrogen Energy},
	volume = {39},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	pages = {20440-20446},
	abstract = {Polymer electrolyte membrane (PEM) water electrolysis is an efficient and environmental friendly method that can be used for the production of molecular hydrogen of electrolytic grade using zero-carbon power sources such as renewable and nuclear. However, market applications are asking for cost reduction and performances improvement. This can be achieved by increasing operating current density and lifetime of operation. Concerning performance, safety, reliability and durability issues, the membrane-electrode assembly (MEA) is the weakest cell component. Most performance losses and most accidents occurring during PEM water electrolysis are usually due to the MEA. The purpose of this communication is to report on some specific degradation mechanisms that have been identified as a potential source of performance loss and membrane failure. An accelerated degradation test has been performed on a MEA by applying galvanostatic pulses. Platinum has been used as electrocatalyst at both anode and cathode in order to accelerate degradation rate by maintaining higher cell voltage and higher anodic potential that otherwise would have occurred if conventional Ir/IrOx catalysts had been used. Experimental evidence of degradation mechanisms have been obtained by post-mortem analysis of the MEA using microscopy and chemical analysis. Details of these degradation processes are presented and discussed.},
	issn = {0360-3199},
	doi = {10.1016/j.ijhydene.2014.05.043},
	url = {http://www.sciencedirect.com/science/article/pii/S0360319914013913},
	author = {S. A. Grigoriev and K. A. Dzhus and D. G. Bessarabov and P. Millet}
}
@article {893,
	title = {First-principles thermodynamic framework for the evaluation of thermochemical H<sub>2</sub>O- or CO<sub>2</sub>-splitting materials},
	journal = {Physical Review B},
	volume = {80},
	note = {{\textquoteright}doi: 10.1021/acsenergylett.0c01132\n - I.Am.Hydrogen{\textquoteright}
{\textquoteright}\n - jyoungstrom{\textquoteright}
{\textquoteright}Jason thinks this is great.\n~\n - jyoungstrom{\textquoteright}
{\textquoteright}\n - estechel{\textquoteright}
},
	issn = {1098-0121, 1550-235X},
	doi = {10.1103/PhysRevB.80.245119},
	url = {http://link.aps.org/doi/10.1103/PhysRevB.80.245119},
	author = {B. Meredig and C. Wolverton}
}
